40-140hp Group D TorqueMaster VX Series Polished Stainless 4-Blade RH Rotation Propeller Blade Units (4 1/4" hub)
Got questions?
Feel free to Get in touch
Ask an expert
A choice of polished stainless "TorqueMaster" range of propellers, designed with high-rake for powerful thrust. Provides excellent stern lift under acceleration, bow lift at cruising and higher speeds, and additional thrust throughout the rev range to push a heavier craft and maintain speed in a larger sea.
PolaStorm R&D Team specify ASTM A890-4A duplex stainless steel. This is heat treated to create a tensile strength of up to 750 Mpa with enhanced anti corrosion properties.
Propeller Suitability:
- Mercury / Mariner: 40BF - 125hp
- Yamaha: 50 (High Thrust) - 130hp
- Selva: Murena, Tarpon, Spearfish, Swordfish
- Suzuki: 70 - 140hp
- Honda: 75 - 115hp (4 1/4" gearbox casing only)
- Evinrude: 40 - 140hp
- Tohatsu: 60 - 140hp
These listings are for the Blade Unit only and require a hub bush kit to install onto your propeller shaft (different kits are available depending on motor brand). If in doubt, please call to discuss before purchase.
Propellers Features:
- 4-Blade design offering great thrust and stern lift
- Progressive pitch allows superior acceleration and midrange performance
- High blade rake provides great bow lift - ideal for forward cabin craft
- Spiral flute exhaust design
- Stainless steel construction reduces blade flex and ensures lower planing and cruising speeds can be maintained
- VX Ring: suitable for 13 tooth spline Suzuki & Johnson / Evinrude outboards
Propeller Specification:
- Material: ASTM A890-4A duplex stainless steel
- Finish: Polished Stainless
- Blades: 4
- Rotation: Right Hand
- To suit: 4 1/4" Gearbox Casing
- Group D
Propeller Sizes:
- 13 1/2" x 13"
- 13 1/2" x 14"
- 13 1/4" x 15"
- 13" x 17"
- 13" x 19"
- 13" x 21"
With over 12 years experience, PolaStorm propellers have built an enviable reputation across the World. Quality consciousness is at the heart of PolaStorms success. Inspections are carried out on every propeller during Casting, Machining, Painting and Packing. Analysis equipment such as Coordinate Measuring Machine, Rubber Torque Tester, Hardness Tester and Dynamic Balance Machine are used to ensure the best quality products are supplied to the market.
Buy with confidence from a UK company who were established in 2014, have 30 years experience, and supply much of the UK & Irish Marine Trade.
- Type Propellers & Accessories
- Vendor PolaStorm
- SKU 4389-4135-13
Compatible With:
- Evinrude Outboards
- Johnson Outboards
- Tohatsu Outboards
- Selva Outboards
- Mariner Outboards
- Mercury Outboards
- Suzuki Outboards
- Yamaha Outboards
- Honda Outboards
Direct to Consumer Pricing
We sell directly to you—no distributors, no wholesalers, no resellers. By cutting out the middlemen, we pass the savings straight to our customers.
-
Mark & Paul, going above and beyond
★★★★★
"We need a prop in a big hurry and Mark and Paul pulled out all the stops to get it to us in record time. Every time I need something it's right first time and on time. It genuinely doesn't get better than specialist small craft"
- Graham -
Propeller replacement in an amazing turn round time.
★★★★★
"On a job in the wilds of Lincolnshire and the workmen on the pontoon hit the propeller on their self-propelled pontoon on rocks and other debris, it was chewed up to less than half the working diameter and one blade was broken in half. A phone call to Specialist Small Craft had a replacement propeller despatched almost immediately and it was with us the following morning. FANTASTIC SERVICE plus the knowledge and experience of the team at Specialist Small Craft is second to none. "
- Simon -
First class team!
★★★★★
"We have been working with Mark over the past couple of decades, Mark and his team have always provided a first class service with a personal touch, we cannot recommend Specialst Smallcraft Highly Enough!"
- John